A pebble tec pool can add value to your property but you need to make sure that it’s well-maintained and clean. Besides dust particles and debris, the pool may even become a breeding ground for bacteria and algae. As a result, you need the best pool brush for pebble tec to keep the surface shining like new.
With a myriad of pool brushes available online, it can be hard to tell which one will last and give you satisfactory results. Save yourself the frustration of ending up with a cheaply built product. We have done in-depth research to help you make the right decision.
Our team has spent hours studying, reviewing, and comparing some of the best pool brushes in the market. Read on to find the unbiased reviews of top models handpicked by us so that you know exactly what you are spending.
If you are in a hurry and don’t have the time to read until the end, then go by our team’s recommendation. We feel that the Wall Whale Classic Swimming Pool Brush (shop now) is the best choice due to its unique tail design and built. It is capable of reducing the cleaning time significantly and helping you keep the pool in the best condition.
1. Oreq 22″ Pro Animal Pebble Brush
This Pro Animal Pebble Brush comes from the house of Oreq, a brand that is known for developing new products and formulations for swimming pools for over the past three decades. Their products come with the promise of quality, innovation, and ease of use – all of which you can find in this pebble brush. Specifically made for pebble tec pools, the brushes are coarse and heavy-duty to extract the algae, dirt, and grit from deep down. It may also be used in plaster, cement, and gunite pool surfaces.
Made from durable plastic material, the brush has both the strength and flexibility to last long. The SpeedLock collar system that attaches the pole to the brush eliminates the risk of damage. It also strengthens the tool, while still enabling it to bend and flex when needed. As there is no use of metal in the design, it does not cause corrosion or rusting. The unique design of the brush helps in cleaning the difficult corners and hard-to-reach areas with its side bristles.
Product features and specifications
- Measures 22 x 3 x 1.5 inches
- Weighs 1 pound
- Grit Bristle
- Made for pebble tec
- Pole locking device
User/ Customer reviews
Most users have mentioned that the brush is well-constructed and sturdy enough to last several uses. People like the fact that it is wide, hence capable of covering a large area at once and the curved ends make it easier to clean the steps. A few users have complained that the way it’s connected to the pole is not so well designed and may need some improvement.
Conclusion
This sturdy pool brush (see Amazon) does a great job of cleaning the surface and keeping it germ-free. It also prevents accidental slips and falls. Overall, we feel this is a good investment you make to keep your pebble tec pool looking nice and safe to use.
2. AquaAce Premium Combo Pool Brush
This premium quality combo brush includes both nylon and steel wire bristles to add that extra scrubbing power to your cleaning tool. We love the fact that it is gentle enough to use for regular or weekly cleanings, and hard enough to remove the stubborn algae and bacteria growth. With a 17-inch width, the brush is capable of covering a large area and the strong aluminum handle adds more longevity to it. The superior grade materials also protect the brush or handle it from rusting or decaying.
The overall design, weight, and balance of the brush make it perfect to be used on swimming pools of various scale. The product comes with three extra replacement V clips for long use. We love the fact that this combo pool brush can be used on concrete or gunite pools, but they should not be used on vinyl or fiberglass surfaces.
Product features and specifications
- Measures 17.4 x 6.5 x 2.6 inches
- Weighs 11.2 ounces
- 3 extra replacement V clips
- Nylon and Stainless Steel Bristles
- Heavy-duty aluminum handle
- Extra scrubbing power
User/ customer reviews
Some buyers have mentioned that this brush gave a longer life to their saltwater pool as it is hard on the grime, but gentle on the pebble tec surface. While some customers find the quality much better than standard nylon brushes, a few have expressed their disappointment on less than 10% stainless steel bristles.
Conclusion
If you have a nice decorative pool and need a brush that’s tough on the stubborn dirt and stains, but gentle with your decorations then get this brush. The unique combination of nylon and stainless steel bristles makes this brush a winner all the way.
3. Swimming Pool Wall Cleaning Brush
The is a uniquely designed curved pool brush to scrub out dirt, debris, and algae from the pebble tec surface. It not only keeps your pool looking clean but also prevents falls by removing the slippery feel. The sturdy construction and design make this pool brush perfect for vinyl, fiberglass, marcite, plaster, and concrete surfaces. It can easily fit with a 1-1/4 inches telescopic vacuum pole to cover a larger area. As the cleaning brush is lightweight, you can clean the pool and surrounding areas without straining your hands.
We are impressed to know that the bristles are made from UV stabilized polypropylene material to last longer and the snap adapt pole fits with ease. The support frame is made from high-grade die-cast aluminum material to add more sturdiness to the product. It will not rust in water, hence the brush stays usable for a long time.
Product features and specifications
- Nylon Bristle
- 18 inches length
- Algae Removing
- Aluminum Handle
- Curved design
User/ Customer reviews
People find this pebble tec pool brush one of the best available in the market for its ability to clean in the hard-to-reach areas. Users find this tool reasonably priced and the slightly round edges provide a great performance.
Conclusion
Keeping your pool clean should not be a stressful job and this pool wall cleaning brush promises to reduce the time needed. At this price, you get a well-built and durable cleaning tool that does its job with the utmost efficiency.
4. Milliard Pool Brush
Stop fighting those tough stains and ugly algae marks that destroy the look of your swimming pool. Use this Milliard Pool Brush that is specially designed with stiff wire bristles to help you get rid of the most stubborn algae growth. When nylon brushes fail, this can be a lifesaver for you. However, please remember that the brush is not designed to be used on vinyl pool liners. You just need to attach an extension pole to the brush to get started.
We are impressed with the 17-inch extra width that enables the brush to cover a much larger area and reduce the cleaning time by half. It can be used to clean inside the pool and also the surrounding areas. The aluminum handle is rust-free and it can be angled at 45 degrees for effective cleaning around the corners. Other parts of the brush are made of ABS plastic to enhance strength and durability. The curved edges do a great job at cleaning in the corners
Product features and specifications
- Measures 19 x 8 x 3 inches
- Weighs 1.1 pounds
- Heavy-duty aluminum
- 17″ Extra-Wide
- Fits standard pool poles
- Curved edges
User/ Customer reviews
Many users have said that the brush is well designed to remove the algae formations and keep the swimming pool in good condition. Customers feel that it does a good job at what it is intended for. People have used the brush on concrete and gunite pools with good results. A few users have complained about the plastic tabs that are too short and the lack of a compatible attachment pole.
Conclusion
If you are looking for a pebble tec pool brush that can clean tight spaces, difficult areas, and algae formations then you must choose this product. Although there is scope for improvement in the design, the product gets the job done with ease.
5. The Wall Whale Classic Swimming Pool Brush
If you are looking for a durable pool brush that gives you that extra power for regular cleaning and removing algae then checks out the Wall Whale Classic. The unique design of the brush has been created based on how the whale moves its powerful tail up and down to propel forward. The brush tail is designed to replicate the same principle as it holds against the pool wall with ten times the force to allow efficient cleaning.
The effective mechanism of the brush makes it possible to clean without using much effort. So, you can brush with just one hand and this works great for routine brushing or combat the algae problems. We are impressed by the Wall Whale powerful brushing force which acts similarly to a spoiler on the car. The hugging action directs the force and power required to boost the cleaning effectiveness and reduce the strain. It not only removes dirt and debris from the swimming pool but also fights tough algae stains.
Product features and specifications
- Measures 18 x 2 x 12 inches
- Weighs 1.6 pounds
- Attaches easily to any pole
- No need for hoses, filters, pumps, or motor
- No need for chemicals
- 4 times more durable
- 10 times more powerful
- Removes algae formation
User/ customer reviews
Those who have used the product say that this is the best pool brush for pebble tec and the biggest difference is the whale fin attached to a nylon brush. People are impressed with how it uses less force to perform better cleaning. A few users have said that they wished the product was slightly more durable. As it’s primarily made of plastic material, exposure to sun and water damage it over time.
Conclusion
Hats off to the guys who thought of adding a bit of physics to pool cleaning and came up with this brilliant idea. The Wall Whale Classic Swimming Pool Brush (shop now) is a brilliantly made tool money can buy. Overall, we feel this is a wise investment for your swimming pool.
Tips For Taking Care Of Your Pebble Tec Pool
If you own a pebble tec pool, it’s a probable matter of great pride for you. However, please ensure that any form of installation work requires good care and maintenance. Here are some tips that can help you maintain your investment and pride.
- After a pebble tec pool is built, make sure you don’t fill it with soft water immediately. If you notice any outside hose connected to soft water supply, notify the applicator or builder immediately. Soft water should be used only after the curing process is completed.
- No matter how excited you may be to try out your new pool, make sure you or pets don’t enter it until it is filled with water and properly balanced. Wait for the green signal from the builder.
- Chlorinating the pool is a common process but make sure you do it only when the carbonate alkalinity and water’s pH are within the acceptable range. Chlorine is highly reactive and it’s higher percentage can cause metals or minerals to precipitate.
- When building a new pebble tec pool, make sure you allow at least 28 days time before assessing the finish colors, appearance, and final water. As the pool achieves the right balance, the color and finish of the pool will change during this time.
- Remember to clean your pool with a good quality brush at least thrice a day for the initial three days and then twice a day for the next 10 days.
- Choose one of the well-designed brush from the products reviewed above. Brush the floor as well as the walls, towards the main drainage area.
- For regular maintenance, use the brush for cleaning at least once every week. The frequency may vary depending on the dust and debris that fall into the pool.
- After a new installation, it is normal for some of the pebbles or glass beads to come out during the curing process. So, it is absolutely fine to experience a small loss of beads or pebbles on start-up.
- Wait at least 14 days after the installation work before heating the pool water and make sure you monitor the chemical balance more closely after that.
- When starting up a new pebble tec pool, wait for at least 28 days before adding salt to the water. If salt stays over the newly finished surface, it may stain, scale or discolor the surface.
Related Questions
Why does my pool watercolor look different than expected?
Several things may impact the color of your pool and these include the time of the day, sun exposure, nighttime lighting, landscape, deck material, and so on. Algae formation on the pool surface can also alter the water color. Hence, use a good quality brush to remove algae and other debris.
How long should I wait before entering my pool?
We strongly recommend you to not enter an empty pool. You should always wait until the pool is filled and the water is properly and chemically balanced before getting into it. Refer to the instructions and guidelines provided by the pool builder.
Will the pebbles fall over time?
Yes, it’s normal for the pebbles to fall during the initial curing process and also some loss of pebbles may occur over time. However, maintaining proper water chemistry is essential to keeping the pool finish intact. If the water chemistry is imbalanced, this may weaken the cement over time and the pebbles may come off in large amounts.
What is the ideal pH and alkaline level for the pebble tec pools?
After a pool startup, make sure you monitor the pH level, calcium hardness, and alkalinity level of the Pebble Tec pool for the initial 30 days after installation. The ideal pH level should be 7.4 to 7.6; the alkalinity level should be 80 to 120 ppm (parts per million). The calcium hardness level should vary from 200 to 400 ppm.
How to keep stains from forming on the pebbles?
With constant exposure to moisture, it’s common for the pebbles to get stained due to algae growth. To put a check on this, make sure you nip any algae formation in the bud. You should also ensure that your pets or kids do not take food or beverages to the pool. Also keep oil, sunscreen, and other cosmetic items away from the pool.
Related Article:
4 Best Pressure Washer For Pool Deck
Does Bleach Damage Vinyl Siding?
How To Clean Dried Polyurethane From Paint Brush
